Top Page Index About Link Mail Form

avrdude Error Message and the Action method


Error MessageMeaning and CauseMethod of Action etc.
avrdude: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc "USBasp" is not Connect Connect USBasp. Or Select other Programmer
avrdude: stk500_2_ReceiveMessage(): timeout Programmer is not Connect with serial port Connect Programmer with serial port. Or Select other Programmer, serial port
avrdude: avrdoper_open(): Device not found. AVR-Doper(HID mode) is not Connect Connect AVR-Doper. Or Select other Programmer
avrdude: error: programm enable: target doesn't answer. 1
  • Not Connect Programmer with Target circuit
  • ISP Connector is bad connection
  • Target circuit power is OFF
Connect ISP Programmer's Connector exactly. Turn On Target circuit power
avrdude: Device signature = 0xfffff avrdude: Yikes! Invalid device signature. Not read device signature Set it slow ISP clock
avrdude: verification error, first mismatch at byte 0x002a
0x31 != 0xb1
Verify error It tries again. Set it slow ISP clock
avrdude: ser_open(): can't open device "USB": File not found The port setting is different. Use avrdude-GUI version 1.0.5 and select 'usb'.